Cutters for road milling machines and recyclers

A new generation of cutters with a carbide tip and a reinforced washer - increases the service life by 15%

Features of KZTS cutters

Cutter tip
The tips are made of a tungsten carbide-cobalt alloy.
The JSC "KZTS" plant is the only manufacturer of carbide alloy in Russia.

The carbide tips of the cutters can withstand shear forces of up to 9,000 kgf.
Wear protection washer
The wear washer thickness has been increased from 3 mm to 6 mm, providing more reliable and longer-lasting toolholder protection than traditional washers.

The washer's bottom has a conical chamfer that improves alignment, effectively distributes loads, and reduces soil particles, thereby increasing the toolholder's service life.
Locking sleeve
The sleeve's design ensures reliable tool rotation and positioning in the toolholder.

The sleeve's high hardness (50 Rockwell units) and good spring properties significantly reduce toolholder wear.

Production of cutters

Cutters for self-propelled and mounted road milling machines

Cutter A4/20
from 450 Rub.
Read more
Cutter A6/20
from 560 Rub.
Read more
Cutter A7/20
from 610 Rub.
Read more
Cutter A8/20
from 720 Rub.
Read more

Modified cutters for self-propelled and mounted road milling machines

Cutter A4/20М
from 450 Rub.
Read more
Cutter A6/20М
from 560 Rub.
Read more
Cutter A7/20М
from 610 Rub.
Read more
Cutter A8/20М
from 720 Rub.
Read more

Comparison of the most famous models of cutters in work

Milling of a road section - E50 highway
Milling area 5 000 м²
Milling depth 5-10 см
Hardness of asphalt concrete pavement М1200

The following brands of road cutters took part in the test:
KZTS- A6/20
Wirtgen - W6/20X2
Kennametal - RK3-02

An equal number of cutters were installed along the milling drum threads.

According to the results of 5,000 m², uniform wear was observed across all cutter types. Radial wear of the carbide tip was also observed.

The KZTS cutter rotates freely, the sleeve does not jam, and the washer withstands abrasive loads.
Cutters are used on road milling machines of the following brands:

Cutters for recyclers and soil stabilizers

Cutter A6/22
from 600 Rub.
Read more
Cutter A7/22
from 670 Rub.
Read more
Cutter A8/22
from 790 Rub.
Read more
Cutters are used on recyclers and soil stabilizers of the following brands:
Test reports for KZTS cutters

Tests of KZTS cutters showed results comparable to those of German Wirtgen cutters.

In-house production of toolholders for road milling machines and recyclers
We work with the largest road construction companies throughout Russia
We deliver products via transport companies from Kaliningrad to Kamchatka.
Kirovgrad Hard Alloy Plant
KZTS - Dormash

The company was founded in 1942.

It is the leading manufacturer of carbide products in Russia and the only company with a full cycle of carbide production.


Since 2001, the company has been producing tools for road construction equipment and manufacturing attachments.


The company maintains strict quality control of all manufactured products to ensure compliance with defense industry standards.

Contacts
Phone: 8 (922) 035-07-47
Email: info@kzts-dm.com

ООО "КЗТС-Дормаш"
INN 6658131074
KPP 668201001
Acc. 40702810800020002572
Address 624140 г.Kirovgrad, Sverdlova street 26а